REGIME CLASSIFICATION OF MACROSCOPIC GAS SOLID FLOW IN A CIRCULATING FLUIDIZED-BED RISER

A conceptual flow regime diagram for a circulating fluidized bed riser is proposed, combining existing investigations with experimental data obtained under idealized conditions in which a fully independent control of gas velocity and solid circulation rate was conducted by use of a screw feeder for solid feed into the riser. The diagram classifies the flow state into five regimes by qualitative transition lines which describe the relationship between gas velocity and solid circulation rate. These regimes are particulate fluidization, bubbling fluidization, turbulent fluidization, dense-phase transport and dilute-phase transport. The diagram suggests that S-shaped bed-density distribution or dense/dilute region interface appears only at limited conditions in the bubbling and turbulent fluidization regimes. These experimental findings were generalized by further experiments in a conventional circulation system with a ball valve between the riser and the downcomer which permits changes in the solid circulation rate and the bed height in the downcomer. The experimental results showed that the bed height in the downcomer has no particular effect on the bed density distribution or the height of the dense/dilute region interface, but an appreciable effect on the lowest gas velocity to maintain steady solid circulation at a given rate. These results are consistent with the above diagram.