AN INTERFACE STUDY OF VARIOUS PVD TIN COATINGS ON PLASMA-NITRIDED AUSTENITIC STAINLESS-STEEL AISI 304

被引：25

作者：

DHAEN, J ^{[1
]}

QUAEYHAEGENS, C ^{[1
]}

KNUYT, G ^{[1
]}

DESCHEPPER, L ^{[1
]}

STALS, LM ^{[1
]}

VANSTAPPEN, M ^{[1
]}

机构：

[1] WTCM,SCI & TECH CTR MET WORKING IND,B-3590 DIEPENBEEK,BELGIUM

来源：

SURFACE & COATINGS TECHNOLOGY | 1993年 / 60卷 / 1-3期

关键词：

D O I：

10.1016/0257-8972(93)90134-A

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The adhesion between a TiN coating and a plasma-nitrided austenitic stainless steel is influenced by using different process steps. In order to obtain some information about the effects of various parameters, different process steps are used during the coating of austenitic stainless steel AISI 304. The deposition of a TiN layer with a Ti intermediate layer results in bad adhesion, especially when a thicker TiN coating has been deposited. X-Ray diffraction measurements indicate the presence of a martensitic phase on top of the plasma-nitrided surface after deposition of the TiN coating. This martensitic phase is also observed if after plasma nitriding only an additional heat treatment is carried out. A transmission electron microscopy study is also performed to reveal the microstructure.

引用

页码：468 / 473

页数：6

共 12 条

[1] INVESTIGATION OF PLASMA-NITRIDED AUSTENITIC STAINLESS-STEEL BY SEM, WDX AND X-RAY-DIFFRACTION [J].

CHUNG, MF ;

LIM, YK .

SCRIPTA METALLURGICA, 1986, 20 (06) :807-812

[2]

Delhez R., 1987, Surface Engineering, V3, P331

[3]

HANNULA SP, 1989, 1988 P INT C HIGH NI, P266

[4]

LIGHTFOOT BJ, 1975, HEAT TREATMENT 73, P59

[5]

Peckner D., 1977, HDB STAINLESS STEELS

[6] CHARACTERIZATION BY GLANCING ANGLE X-RAY-DIFFRACTION OF THE INTERFACE BETWEEN AUSTENITIC STAINLESS-STEEL AISI-304 SUBSTRATES AND A TIN OR TI/TIN PHYSICAL VAPOR-DEPOSITION COATING [J].

QUAEYHAEGENS, C ;

STALS, LM ;

DESCHEPPER, L ;

VANSTAPPEN, M ;

MALLIET, B .

SURFACE & COATINGS TECHNOLOGY, 1991, 45 (1-3) :193-200

[7] INTERFACE STUDY OF PHYSICALLY VAPOR-DEPOSITED TIN COATINGS ON PLASMA-NITRIDED TOOL STEEL SURFACES WITH AUGER-ELECTRON SPECTROSCOPY, RESONANT NUCLEAR-REACTION ANALYSIS AND RUTHERFORD BACKSCATTERING SPECTROSCOPY [J].

QUAEYHAEGENS, C ;

VANSTAPPEN, M ;

STALS, LM ;

BODART, F ;

TERWAGNE, G ;

VLAEMINCK, R .

SURFACE & COATINGS TECHNOLOGY, 1992, 54 (1-3) :279-286

[8]

Rolinski E., 1987, Surface Engineering, V3, P35

[9]

STRYDOM IL, 1991, P IPAT 91 EDINBURGH, P266

[10] PLASMA SURFACE ENGINEERING OF LOW-ALLOY STEEL [J].

SUN, Y ;

BELL, T .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 140 :419-434

← 1 2 →