RESIDUAL VIBRATION REDUCTION USING VECTOR DIAGRAMS TO GENERATE SHAPED INPUTS

被引：324

作者：

SINGHOSE, W

SEERING, W

SINGER, N

机构：

[1] Convolve, Inc., Armonk, NY, 10504, One Quarter Mile Road

[2] Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA

来源：

JOURNAL OF MECHANICAL DESIGN | 1994年 / 116卷 / 02期

关键词：

D O I：

10.1115/1.2919428

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper describes a method for limiting vibration in flexible systems by shaping the input to the system. Unlike most previous input shaping strategies, this method does not require a precise system model or lengthy numerical computation; only estimates of the system natural frequency and damping ratio are required. The effectiveness of this method when there are errors in the system model is explored and quantified. Next, an algorithm is presented, which, given an upper bound on acceptable residual vibration amplitude, determines a shaping strategy that is insensitive to errors in the estimate of the natural frequency. Finally, performance predictions are compared to hardware experiments.

引用

页码：654 / 659

页数：6

共 14 条

[1]

Chun H.M., Turner J.D., Juang J.-N., Disturbance-Accommodating Tracking Maneuvers of Flexible Spacecraft, Journal of the As-Tronautical Sciences, 33, 2, (1985)

[2]

Farrenkopf R.L., Optimal Open-Loop Maneuver Profiles for Flexible Spacecraft, Journal of Guidance and Control, Vol. 2, No. 6 (Nov.-Dec.), (1979)

[3]

Gupta N.K., Frequency-Shaped Cost Functionals: Extension of Linear-Quadratic, Journal of Guidance and Control, 3, 6, (1980)

[4]

Hollars M.G., Cannon R.H., Experiments on the Endpoint Control of a Two-Link Robot with Elastic Drives, (1986)

[5]

Junkins J.L., Turner J.D., Optimal Spacecraft Rotational Maneuvers, (1986)

[6]

Singer N.C., Residual Vibration Reduction in Computer Controlled Machines, (1989)

[7]

Singer N.C., Seering W.P., Preshaping Command Inputs to Reduce System Vibration, ASME Journal of Dynamic Systems, Measurement, and Control, (1990)

[8]

Singhose W.E., A Vector Diagram Approach to Shaping Inputs for Vibration Reduction, (1990)

[9]

Singhose W.E., Seering W.P., Singer N.C., Shaping Inputs to Reduce Vibration: A Vector Diagram Approach, IEEE International Conference on Robotics and Automation, (1980)

[10]

Singhose W.E., Seering W.P., Generating Vibration-Reducing Inputs with Vector Diagrams, Eighth World Congress on the Theory of Machines and Mechanisms, (1991)

← 1 2 →