DEVELOPMENT OF A QUICK-STOP DEVICE FOR METAL CUTTING RESEARCH

被引：17

作者：

ELLIS, J

KIRK, R

BARROW, G

机构：

[1] Machine Tool Division, Department of Mechanical Engineering, University of Manchester Institute of Science and Technology

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOL DESIGN AND RESEARCH | 1969年 / 9卷 / 03期

关键词：

D O I：

10.1016/0020-7357(69)90007-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work records the development of a quick-stop device employing a commercial explosive motor. Assessments of the performance of the device in its original design revealed that it had serious faults. These faults were rectified through modifications. Comparison with other quick-stop devices (published data) showed the speed of separation for the modified device to be good. Static and dynamic stiffness tests suggested that the device was acceptable from these standpoints. The device was canted over during cutting tests to avoid interference of the tool with the previously cut workpiece surface during the tool retraction process. An analysis is made which enables the chip root distortion introduced by canting to be evaluated. © 1969.

引用

页码：321 / &

共 11 条

[1]

BHATTACHARYYA A, 1965, 6 INT MACH TOOL DES

[2]

HASTINGS WF, 1967, CIRP ANN-MANUF TECHN, V15, P109

[3]

HEGINBOTHAM WB, 1966, 7 INT MACH TOOL DES

[4]

HEGINBOTHAM WB, 1961, P I MECH ENG, V175, P892

[5]

HERBERT EG, 1928, P I MECH ENG, P775

[6]

KARDOS A, 1966, ACTA TECH HUNG, V53, P164

[7]

Kececioglu D., 1958, T ASME, V80, P158

[8] DYNAMIC EFFECTS OF MACHINING WITH ALTERNATING CURRENT [J].

MACMANUS, BR .

INTERNATIONAL JOURNAL OF MACHINE TOOL DESIGN AND RESEARCH, 1968, 8 (02) :83-&

[9]

Opitz H, 1962, INT J MACH TOOL MANU, V2, P43

[10]

ROLLASON EC, 1965, IRON STEEL I MACHINA

← 1 2 →