SUPERCONDUCTING TERAHERTZ MIXER USING A TRANSITION-EDGE MICROBOLOMETER

We present a new device concept for a mixer element for THz frequencies. This uses a superconducting transition-edge microbridge biased at the center of its superconducting transition near 4.2 K. It is fed from an antenna or waveguide structure. Power from a local oscillator and a rf signal produce a temperature and resulting resistance variation at the difference frequency. The new aspect is the use of a very short bridge in which rapid (< 0.1 ns) outdiffusion of hot electrons occurs. This gives large intermediate frequency (if) response. The mixer offers almost-equal-to 4 GHz if bandwidth, almost-equal-to 80 OMEGA rf resistive impedance, good match to the if amplifier, and requires only 1-20 nW of local oscillator power. The upper rf frequency is determined by antenna or waveguide properties. Predicted mixer conversion efficiency is 1/8, and predicted double-sideband receiver noise temperatures are 260 and 90 K for transition widths of 0.1 and 0.5 T(c) respectively.