STRENGTH VERSUS CONDUCTIVITY

被引：26

作者：

FRINGS, PH ^{[1
]}

VANBOCKSTAL, L ^{[1
]}

机构：

[1] KATHOLIEKE UNIV LEUVEN,DEPT NAT KUNDE,B-3001 HEVERLEE,BELGIUM

来源：

PHYSICA B | 1995年 / 211卷 / 1-4期

关键词：

D O I：

10.1016/0921-4526(94)00947-T

中图分类号：

O469 [凝聚态物理学];

学科分类号：

070205 ;

摘要：

In the development of conductors for high-field coils one has to find a compromise between high strength (to withstand the Lorentz force) and high conductivity (longer pulse time, minimal power, energy and volume required). The design of coils is a non-linear process that is partly based on educated guesses guided by trial and error. Based on the concept of the ''current carrying capability'' a simple scheme for optimal choice of wire for the relatively simple cases of energy limited coils (or the innermost parts of power limited coils) is developed. On basis of this criterion, the optimal direction of research on new wires or materials is determined.

引用

页码：73 / 76

页数：4

共 6 条

[1]

Gersdorf, Muller, Roeland, Rev. Sci. Instr., 36, (1965)

[2]

Sakai, Inoue, Asano, Wada, Appl. Phys. Lett., 59, (1991)

[3]

Foner, Appl. Phys. Lett., 49, (1986)

[4]

Jones, Herlach, Lee, Whitworth, Day, Jeffery, Dew-Hughes, Sherrat, 50 tesla pulsed magnets using a copper conductor externally reinforced with stainless steel, IEEE Transactions on Magnetics, 24, (1988)

[5]

Van Bockstal, Heremans, Herlach, Measurement Sci. Technol., 2, (1991)

[6]

Van Bockstal, Harrison, Liang, Herlach, Dupouy, Askenazy, A non-destructive approach to 100 T, Physica B: Condensed Matter, 211, (1995)

← 1 →