PSYCHROMETRIC MEASUREMENT OF SOIL-WATER POTENTIAL - STABILITY OF CALIBRATION AND TEST OF PRESSURE-PLATE SAMPLES

A commercially available thermocouple psychrometer sample changer (Decagon SC-10A) was used to measure the water potential of field soils ranging in texture from sand to silty clay loam over a range of −0.5 to −20.0 MPa. The standard error of prediction based on regression statistics was generally between 0.04 and 0.14 MPa at −5 MPa. Replacing the measuring junction of the unit changed the calibration slightly; however, it did not significantly alter measurement accuracy. Calibration curves measured throughout a year of testing are consistent and indicate no systematic drift in calibration. Most measurement uncertainty is produced by shifts in the intercept in the calibration equation rather than the slope. Both the variability in intercept and the regression error seem to be random. Measurements taken with the SC-10A show that water potential in both sand and silt loam samples removed from 1.5-MPa pressure plates was often 0.5 to 1.0 MPa greater than the 1.5-MPa applied pressure. Limited data from 0.5-MPa pressure plates show close agreement between SC-10A measurements and pressure applied to these more permeable plates. © 1990 Williams and Wilkins.