PREDICTION OF THE CUTTING FORCES FOR CHAMFERED MAIN CUTTING EDGE TOOLS

被引：13

作者：

FUH, KH

CHANG, CS

机构：

[1] Department of Mechanical Engineering, Tatung Institute of Technology, Taipei

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1995年 / 35卷 / 11期

关键词：

D O I：

10.1016/0890-6955(94)E0006-5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A new cutting model of various tool geometries for tools with a chamfered main cutting edge has been built. Theoretical values of cutting forces were calculated and compared with the experimental results; the forces predicted by this model were consistent with the experimental values. Special tool holders were designed and manufactured to obtain various tool geometries. Cutting experiments were conducted on a carbon steel to examine the mechanism of secondary chip formation; the relationship between the shapes of secondary chips and tool geometries was observed.

引用

页码：1559 / 1586

页数：28

共 19 条

[1]

Hoshi, Proc. Int. Conf. Cut. Tool Mater., pp. 15-18, (1980)

[2]

Sorin, Microtechnic, 9, pp. 125-133, (1955)

[3]

Hoshi, Hoshi, Metal Cut. Technol., pp. 87-104, (1969)

[4]

Armarego, Int. J. Mach. Tool Des. Res., 7, pp. 100-111, (1967)

[5]

Luk, Int. J. Mach. Tool Des. Res., 9, pp. 85-96, (1969)

[6]

Luk, Int. J. Mach. Tool Des. Res., 10, pp. 66-75, (1970)

[7]

Usui, Hirota, Masuko, Trans. Am. Soc. Mech. Engrs, 100, pp. 222-228, (1978)

[8]

Usui, Hirota, Masuko, Trans. Am. Soc. Mech. Engrs, 100, pp. 229-235, (1978)

[9]

Vinod, Lau, Barrow, Trans. Am. Soc. Mech. Engrs, 100, pp. 287-292, (1978)

[10]

Fuh, Tsai, J. Tatung, Taiwan, R.O.C., 16, pp. 88-97, (1986)

← 1 2 →