APPLICATION OF AUGER-ELECTRON SPECTROSCOPY FOR SURFACE CHEMICAL-ANALYSIS OF AVCOTHANE

The effect of the exposure to air or to the substrate during the solvent casting process on the surface chemical composition of Avcothane, a blood compatible biomaterial, was studied by employing Auger electron spectroscopy. The surface layer of 10–15Å thickness was analyzed without sputtering, but for the studies probing a deeper layer, argon ion sputtering at a low enough voltage to prevent artifacts was utilized. It is found that the air facing surface which is the blood contact surface contains a greater amount of silicone polymer and a much lower amount of the urethane hard segment in the first 10–15Å‐deep layer than in the comparably thick layer of the substrate surface. However, the depth‐composition profile obtained by sputtering indicate that, probably at a deeper depth, the chemical compositions in terms of silicone polymer and hard segment is comparable both in the air side and the substrate side. Copyright © 1979 John Wiley & Sons, Inc.