RADIATION-CROSSLINKED POLYPROPYLENE - PHYSICAL AND DIELECTRIC PROPERTIES

Irradiation of two stereoregular polypropylenes and a polyallomer via 60Co in the presence of 3–8% allyl methacrylate (AMA) monomer, to does up to 5 Mrad, lead to an improvement in mechanical properties. With irradiation, heat resistance, tensile strength, and gel fractions increased, and creep compliance decreased. The decrease in creep compliance was revealed by measurements of irradiated samples at 1850C (at constant load and monomer level), a temperature above the Tm of polypropylene. Dielectric properties (dielectric constant K and dissipation factor tan δ) were virtually unaffected by irradiation of 0.3 to 5.0 Mrad in nitrogen when AMA was absent. In the presence of monomer, small but generally tolerable increases in tan δ resulted if the monomer concentration was not too great. To obtain improvements in mechanical properties while not simultaneously altering the dielectric losses, it was necessary to keep the AMA concentration to a maximum of 4%. Copyright © 1969 John Wiley & Sons, Inc.