STRESS MEASUREMENT IN GRAPHITE-EPOXY COMPOSITES BY X-RAY-DIFFRACTION FROM FILLERS

被引:29
作者
PREDECKI, P
BARRETT, CS
机构
[1] University of Denver, Research Institute Denver
关键词
D O I
10.1177/002199837901300105
中图分类号
TB33 [复合材料];
学科分类号
摘要
The purpose of this work was to measure stresses in graphite/epoxy composites by diffracting X-rays from crystalline filler particles embedded in unidirectional laminates before curing. Particles used were Ag, Nb and CdO, having sharp diffraction peaks at large diffraction angles, θ. The diffraction peaks shift linearly with applied stress in the fiber direction and have stress sensitivities of (2.6, 3.9 and 1.9) X 10-4deg 2θ/MPa for Ag, Nb and CdO respectively. Elastic strains in filler particles measured by X-rays are proportional to the corresponding composite strains in agreement with the model of H. T. Hahn. Residual strains and stresses in filler particles were also obtained. © 1979, Sage Publications. All rights reserved.
引用
收藏
页码:61 / 71
页数:11
相关论文
共 8 条
[1]   STRESS MEASUREMENT IN POLYMERIC MATERIALS BY X-RAY-DIFFRACTION [J].
BARRETT, CS ;
PREDECKI, P .
POLYMER ENGINEERING AND SCIENCE, 1976, 16 (09) :602-608
[2]  
BARRETT CS, 1978, ADV XRAY ANAL, V21, P305
[3]  
BARRETT CS, 1966, STRUCTURE METALS, P466
[4]  
HAHN HT, 1978, AFMLTR7833, P65
[5]  
HAWKES GA, 1974, J AUST I MET, V19, P200
[6]  
MCCLINTOCK FA, 1966, MECHANICAL BEHAVIOR, P81
[7]  
SAMOILOV AI, 1977, FIZ KHIM OBRAB MATER, V3, P121
[8]  
1971, J784A SAW INF REP