AN EXPERIMENTAL-STUDY OF FATIGUE-STRENGTH FOR ADHESIVELY BONDED TUBULAR SINGLE LAP JOINTS

被引：70

作者：

LEE, DG

KIM, KS

IM, YT

机构：

[1] Department of Production Engineering, Korea Advanced Institute of Science and Technology, Taejon-shi

来源：

JOURNAL OF ADHESION | 1991年 / 35卷 / 01期

关键词：

MANUFACTURING TECHNOLOGY; ADHEREND SURFACE ROUGHNESS; SURFACE PREPARATION; BONDING PROCESS; ADHESIVE THICKNESS; TORSIONAL STRENGTH;

D O I：

10.1080/00218469108030434

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In this paper, manufacturing technology of the tubular single lap adhesive joint was studied to obtain reliable and optimal joint quality. In addition, a surface preparation method and a bonding process for the joint were devised. The effect of the adhesive thickness and the adherend roughness on the fatigue strength of the joint was experimentally investigated. From experiments, it has been found that the fatigue strength of the joint increased as the adhesive thickness decreased and the optimal arithmetic surface roughness of the adherends was about 2 μm. © 1991, Taylor & Francis Group, LLC. All rights reserved.

引用

页码：39 / 53

页数：15

共 15 条

[1] STRESS ANALYSIS OF ADHESIVE BONDED TUBULAR LAP JOINTS [J].