THE EFFECT OF INTERMITTENT HEATING ON FATIGUE CRACK-GROWTH

被引:9
作者
LAM, YC [1 ]
GRIFFITHS, JR [1 ]
机构
[1] MONASH UNIV,DEPT MAT ENGN,CLAYTON,VIC 3168,AUSTRALIA
关键词
D O I
10.1016/0167-8442(90)90042-X
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The effects on fatigue crack growth of the application of heat treatment with and without an applied load are discussed. The investigation indicates that when heat treatment is performed simultaneously with an applied load, compressive residual stress will be introduced resulting in better resistance to fatigue crack initiation and growth. Fatigue crack growth tests were performed on single-edge-cracked plates. The fatigue life and crack growth rate for plates with no heat treatment and plates with heat treatment under zero stress are similar. However, for plates with heat treatment carried out under a static load equal to the maximum in the fatigue cycle, the fatigue life increased by 40% and the crack growth rate immediately after heat treatment decreased by 65%. © 1990.
引用
收藏
页码:37 / 41
页数:5
相关论文
共 11 条
[1]  
[Anonymous], 1966, ASTM SPEC TECH PUBL
[2]   MECHANISMS OF OVERLOAD EFFECT ON FATIGUE CRACK-PROPAGATION IN ALUMINUM-ALLOYS [J].
BATHIAS, C ;
VANCON, M .
ENGINEERING FRACTURE MECHANICS, 1978, 10 (02) :409-&
[3]   FRACTURE-MECHANICS CONSIDERATION OF RESIDUAL-STRESSES INTRODUCED BY COLD-WORKING FASTENER HOLES [J].
CATHEY, WH ;
GRANDT, AF .
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1980, 102 (01) :85-91
[4]   EXPERIMENTAL-STUDY OF FATIGUE CRACK INITIATION AND GROWTH FROM COLDWORKED HOLES [J].
CHANDAWANICH, N .
ENGINEERING FRACTURE MECHANICS, 1979, 11 (04) :609-&
[5]  
CLARK G, 1982, P INT C FRACTURE MEC, P417
[6]  
Corbly D. M., 1973, Engineering Fracture Mechanics, V5, P479, DOI 10.1016/0013-7944(73)90034-9
[7]  
GURNEY TR, 1959, RB16759 BRIT WELD RE, P491
[8]  
IRWIN GR, 1960, ASME J BASIC ENGINEE, P417
[9]   EFFECT OF EXPOSURE TO ELEVATED-TEMPERATURES ON DELAY IN CRACK GROWTH DUE TO A HIGH STRESS CYCLE [J].
RAJU, KN ;
RAO, BVS ;
NINGIAH, V .
INTERNATIONAL JOURNAL OF FRACTURE MECHANICS, 1972, 8 (01) :99-102
[10]  
SAUNDERS GG, 1981, RESIDUAL STRESSES TH, P41