A THERMODYNAMIC MODEL FOR THE ANALYSIS OF SCREW EXPANDER PERFORMANCE

被引：43

作者：

NG, KC

BONG, TY

LIM, TB

机构：

来源：

HEAT RECOVERY SYSTEMS & CHP | 1990年 / 10卷 / 02期

关键词：

D O I：

10.1016/0890-4332(90)90166-H

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

In this paper, a thermodynamic model for the analysis of screw expander performance is presented. The model estimates the work output of the expander by considering the work availability of the expanding fluid in a typical cycle. The validity of the proposed model is checked by using some of the experimental data that are available in the literature. Further parametric studies are also conducted to improve the understanding of the blowdown and blowback effects, the blowdown mass and pressure ratio, and the overall isentropic efficiency of the expander. The types of working fluid used by the expanders are dry saturated steam and high quality steam. © 1990.

引用

页码：119 / 133

页数：15

共 15 条

[1]

Carey, Total flow power generation from geothermal resources using a helical screw expander, Proc. 5th N.Z. Geothermal Workshop, pp. 127-132, (1983)

[2]

Steidel, Et al., Performance characteristics of the Lysholm engine as tested for geothermal power applications in the Imperical Valley, J. Engng Pwr, 104, pp. 231-240, (1982)

[3]

Wilson, Radwan, An appropriate thermodynamics for heat engine analysis and design, Int. J. Mech. Educ., 5, 1, (1977)

[4]

Smith, Martin, Power from low grade heat sources. Project Sphere—an evaluation of the trilateral wet-vapour cycle, Chart. Mech. Engr, (1985)

[5]

Margolis, Analytical modelling of helical screw turbines for performance prediction, J Engng Pwr, 100, pp. 482-487, (1978)

[6]

Frau, USDOE, DOE/ET/27252-T4, Comparison between two Lysholm engines, (1983)

[7]

Dunbar, USDOE, DOE/ET/27252-T3, Altering the volumetric expansion ratio of a Lysholm helical screw expander, (1984)

[8]

Brown, USDOE, DOE/ET/27252-T8, Empirical modelling of a Lysholm helical screw expander, (1984)

[9]

Sandfors, Analytical modelling of helical screw machine for analysis and performance prediction, Proc. Purdue Compressor Tech. Conference, pp. 135-139, (1984)

[10]

Ng, Lim, Bong, Analysis of screw expander performance, ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 1989-1996 (vols 203-210), 203, pp. 15-20, (1989)

← 1 2 →