MODELING OF THE PROCESS DAMPING FORCE IN CHATTER VIBRATION

被引：73

作者：

LEE, BY ^{[1
]}

TARNG, YS ^{[1
]}

MA, SC ^{[1
]}

机构：

[1] NATL YUNLIN POLYTECH INST,DEPT MECH MFG ENGN,YUNLIN 63208,TAIWAN

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1995年 / 35卷 / 07期

关键词：

D O I：

10.1016/0890-6955(94)00046-M

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents a new mechanistic model to study the complex and highly nonlinear process damping force in chatter vibration. In the developed model, a feedforward neural network is used to model cutting force components. The process damping force due to the interface between the tool flank and machined surface is estimated through the calculation of the volume of the work material displaced by the tool flank. To properly calculate the volume of the displaced work material, the vibration of the tool relative to the workpiece is solved using the equations of motion iteratively until a convergence criterion is satisfied. The study has shown that the developed model is much better than previous models in the analysis of dynamic behaviors of the nonlinear process damping force in chatter vibration.

引用

页码：951 / 962

页数：12

共 17 条

[1]

Tlusty, Analysis of the state of research in cutting dynamics, Ann. CIRP, 27, 2, pp. 583-589, (1978)

[2]

Shi, Tobias, Theory of finite amplitude machine tool instability, Int. J. Mach. Tool Des. Res., 24, 1, pp. 45-69, (1984)

[3]

Wu, Liu, An analytical model of cutting dynamics. Part 1: model building

[4]

Part 2: verification, ASME J. Engng Ind., 107, pp. 107-118, (1985)

[5]

Tarng, Young, Lee, An analytical model of chatter vibration in metal cutting, Int. J. Mach. Tools Manufact., 34, 2, pp. 183-197, (1994)

[6]

Sisson, Kegg, An explanation of low-speed chatter effects, Journal of Engineering for Industry, 91, (1969)

[7]

Tlusty, Heczko, Improving tests of damping in the cutting process, 8th NOrth American Manufact. Res. Conf. Proc., SME, pp. 372-376, (1980)

[8]

Balakrishnan, Eman, Wu, Analysis of cutting process damping, 9th North American Manufact. Res. Conf. Proc., SME, (1981)

[9]

Jemielniak, Widota, Numerical simulation of non-linear chatter vibration in turning, Int. J. Mach. Tools Manufact., 29, 2, pp. 239-247, (1989)

[10]

Young, Tarng, Application of machining theory to regenerative chatter in turning, Bull. Coll. Engng, N. T. U., 58, pp. 101-122, (1993)

← 1 2 →