MONITORING DRILL CONDITIONS WITH WAVELET-BASED ENCODING AND NEURAL NETWORKS

被引:57
作者
TANSEL, IN
MEKDECI, C
RODRIGUEZ, O
URAGUN, B
机构
[1] Department of Mechanical Engineering, Florida International University, Miami, FL 33199, University Park Campus
[2] Electrical Engineering Department, Tufts University, Medford
关键词
D O I
10.1016/0890-6955(93)90092-9
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Encoding of thrust force signals of microdrilling operations with wavelet transformations and classification of estimated coefficients with adaptive resonance theory (ART2)-type neural networks are proposed for detection of severe tool damage just before complete tip breakage occurs. The coefficients of the wavelets were classified both directly and after a secondary encoding to reduce the number of inputs. Direct classification of the wavelets was found to be more reliable in the sixty-one cases studied. The proposed approach was also tested with two sampling intervals. Large sampling intervals were used to inspect complete drilling cycles. Smaller sampling intervals were used to focus on thrust force variations during the motion of the machine tool table when it is driven by a stepping motor. It was found that the data collected at smaller sampling intervals were easier to classify to detect severe damage to the tool.
引用
收藏
页码:559 / 575
页数:17
相关论文
共 34 条
[1]  
Otnes, Enochson, Applied Time Series Analysis, 1, (1978)
[2]  
Jenkins, Watts, Spectral Analysis and Its Applications, (1968)
[3]  
Burg, A new analysis technique for time series data, Presented at the NATO Advanced Study Institute on Signal Processing with Emphasis on Underwater Acoustics, (1968)
[4]  
Box, Jenkins, Time Series Analysis, Forecasting and Control, (1976)
[5]  
Wu, Dynamic data system: a new modeling approach, Trans ASME J. Engng Ind., 99, pp. 708-714, (1977)
[6]  
Pandit, Wu, Time Series and System Analysis, (1983)
[7]  
Sinha, Kuszta, Modeling and Identification of Dynamic Systems, (1983)
[8]  
Braun, Signal processing for the determination of chatter threshold, Ann. CIRP, 8, pp. 315-320, (1975)
[9]  
Gelb, Applied Optimal Estimation, (1980)
[10]  
Bandyopadhyay, Gonzalez, Huang, Wu, A feasibility study of on-line monitoring by DDS methodology, Int. J. Mach. Tool Des. Res., 26, pp. 245-257, (1986)