ON THE USE OF CONVENTIONAL COCURRENT AND COUNTERCURRENT EFFECTIVE PERMEABILITIES TO ESTIMATE THE 4 GENERALIZED PERMEABILITY COEFFICIENTS WHICH ARISE IN COUPLED, 2-PHASE FLOW

In the case of coupled, two-phase flow of fluids in porous media, the governing equations show that there are four independent generalized permeability coefficients which have to be measured separately. In order to specify these four coefficients at a specific saturation, it is necessary to conduct two types of flow experiments. The two types of flow experiments used in this study are cocurrent and countercurrent, steady-state permeability experiments. It is shown that, by taking this approach, it is possible to define the four generalized permeability coefficients in terms of the conventional cocurrent and countercurrent effective permeabilities for each phase. It is demonstrated that a given generalized phase permeability falls about midway between the conventional, cocurrent effective permeability for that phase, and that for the countercurrent flow of the same phase. Moreover, it is suggested that the conventional effective permeability for a given phase can be interpreted as arising out of the effects of two types of viscous drag: that due to the flow of a given phase over the solid surfaces in the porous medium and that due to momentum transfer across the phase 1-phase 2 interfaces in the porous medium. The magnitude of the viscous coupling is significant, contributing at least 15% to the total conventional cocurrent effective permeability for both phases. Finally, it is shown that the nontraditional generalized permeabilities which arise out of viscous coupling effects cannot equal one another, even when the viscosity ratio is unity and the surface tension is zero.