POLYMER INTERMEDIATES AND POLYMERS DERIVED FROM 5-T-BUTYL-M-XYLENE

A series of condensation polymer intermediates, which included several new compositions, was prepared from 5-t-butyl-m-xylene (I) so that the effect of the bulky t-butyl group on polymer properties could be determined. Compound (I) was oxidized with nitric acid to obtain 5-t-butyl-isophthalic acid (II), which was converted successively to the diacid chloride, the diamide, the dinitrile, and finally to 5-t-butyl-m-xylene-α,α′-diamine (VI); the overall yield was 80%. The dimethyl ester of (II) was prepared and converted to 5-t-butyl-m-xylene-α,α′-diol (VIII), a new composition, in 79.5% overall yield; the diphenyl ester was also prepared. The sodium salt of (II) was catalytically reduced to obtain 5-t-butyl-1,3-cyclohexanedicarboxylic acid (IIa) in 95% yield. (IIa) was converted successively to the diacid chloride, the diamide, the dinitrile, and finally to 5-t-butyl-1,3-cyclohexanebis(methylamine) (VIa), a new composition; the overall yield was 37%. (IIa) was also converted to the dimethyl ester and finally to 5-t-butyl-1,3-cyclohexanedimethanol (VIIIa), a new composition; the overall yield was 64%. Condensation polymers were prepared from the intermediates (II), (IIa), (VI), (VIa), (VIII), and (VIIIa). These polymers had higher glass transition temperatures (Tg) than corresponding polymers containing no t-butyl groups. This general effect of the t-butyl group to increase the Tg value of the polymer was noted in all polymers prepared, regardless of whether the intermediate carrying the t-butyl group was a diacid, a diol, or a diamine, or whether the polymer was a polyamide, a polyester, or a polyurethane. © 1969, Taylor & Francis Group, LLC. All rights reserved