TRIBOLOGICAL CHARACTERISTICS OF DLC FILMS AND DUPLEX PLASMA NITRIDING/DLC COATING TREATMENTS

An innovative approach to improving tribological behavior of surfaces and meeting long-term durability requirements of engineering devices is to design and develop novel systems incorporating multilayers and/or duplex diffusion/plasma coating treatments. In the present work, the wear and friction characteristics of diamond-like carbon (DLC) films and composite surface layers were studied by conducting pin-on-disc experiments. M 50 steel and Ti-6Al-4V alloy were used as substrate materials. The composite layers consisted of a N-diffusion zone obtained by ion nitriding, followed by a 500 Angstrom vapor-deposited Si bond layer and a 0.4 mu m DLC him. The purpose of the bond layer was to enhance adhesion between the substrate and the DLC films. An ion-beam method was used for the deposition of the DLC films. The pin-on-disc results showed that for both materials the DLC coating produced a reduction in the coefficient of friction of about one order of magnitude. The reduction in the coefficient of friction was found to be consistent with the formation of a carbon-rich transfer film on the contact surfaces. Wear scar profiling and weight loss calculations showed that the wear resistance of the DLC-coated materials was dramatically improved. Comparisons between duplex N-diffusion layer/DLC coating and single DLC coating on Ti-6Al-4V alloy substrates showed that the duplex treatments possessed a significantly higher wear resistance. Nitriding was found to cause substrate hardening that reduces subsurface deformation, thus improving coating support and extending considerably DLC film lifetime.