A NEW MACHINE STRATEGY FOR SCULPTURED SURFACES USING OFFSET SURFACE

被引：39

作者：

KIM, KI ^{[1
]}

KIM, K ^{[1
]}

机构：

[1] UNIV ILLINOIS,DEPT MECH ENGN,CHICAGO,IL 60680

来源：

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH | 1995年 / 33卷 / 06期

关键词：

D O I：

10.1080/00207549508930236

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A new CNC tool path planning method is developed for accurate and efficient finishing cutting of sculptured surfaces. The proposed method generates CNC tool paths based on an offset surface of an object instead of the actual surface. The new algorithm consists of two main computational techniques: offset surface generation technique and offset CNC tool path planning technique. In offset surface generation, approximate parametric offset surfaces are generated accurately from an original parametric surface by employing bi-cubic surface patch, surface conversion, and surface subdivision algorithms. In offset CNC tool path planning, the precise geometric models of chordal deviation and cusp height on an offset surface are established. The effectiveness of this proposed CNC tool path planning method is verified by geometric simulation and verification which detect and identify errors in CNC tool paths.

引用

页码：1683 / 1697

页数：15

共 16 条

[1]

Aomura S., Uehara T., Self-intersection of an offset surface, Computer-Aided Design, 22, 7, pp. 417-422, (1990)

[2]

Bobrow J.E., NC machine tool path generation from CSG part representations, Computer-Aided Design, 17, 2, pp. 69-76, (1985)

[3]

Chen Y.D., Nt J., Wu S.M., Real time CNC tool path generation for machining IGES surfaces, ASME 1991, pp. 187-199, (1991)

[4]

Chen Y.J., Ravan B., Offset surface generation and contouring in computer-aided design, ASME Journal of Mechanisms, Transmission, and Automation in Design, 109, pp. 133-142, (1987)

[5]

Choi B.K., Lee C.S., Hwang J.S., Jun C.S., Compound surface modelling and machining, Computer-Aided Design, 20, 3, pp. 127-136, (1988)

[6]

Farin G., Curves and Surfaces for Computer Aided Geometric Design, (1990)

[7]

Farouki R.T., The approximating of non-degenerate offset surfaces, Computer Aided Geometric Design, 3, 1, pp. 15-43, (1986)

[8]

Faux I.D., Prati M.J., Computational Geometry for Design and Manufacture, (1979)

[9]

Hoschek J., Offset curves in the plane, Computer-Aided Design, 17, 2, pp. 77-82, (1985)

[10]

Kim K.I., Kim K., Parametric tool path planning based on new variable step strategy for sculptured surfaces, Transactions of the North American Manufacturing Research Institution of SME, 21, pp. 95-102, (1993)

← 1 2 →