OXIDATION-REDUCTION EFFECTS IN THE FLOTATION OF CHALCOCITE AND CUPRITE

A laboratory study of the batch flotation of chalcocite from chalcocite-quartz mixtures and of cuprite from cuprite-quartz mixtures with potassium ethyl xanthate as collector has shown that the oxidation-reduction state of the flotation pulp can have a pronounced influence on mineral floatabilities. At pH 11 chalcocite floated over a relatively narrow Eh range of about 300 mV; pH had no influence on the potential of the lower flotation boundary in reducing conditions but had a significant effect on the potential of the upper boundary in oxidizing conditions. Below this upper limit, the floatability was reversible with respect to Eh. Provided the Eh was in correct region chalcocite could be floated in the absence of measurable concentrations of dissolved oxygen. Cuprite displayed a high level of floatability with ethyl xanthate for which, by contrast with chalcocite, no flotation limit in reducing conditions was found; over a small range of potentials close to zero, its behaviour was strongly pH dependent. An attempt to account for the floatabilities of chalcocite and cuprite in terms of the formation of cuprous ethyl xanthate on their surfaces did not lead to correlations with the observed behaviour in reducing conditions but provided a rough correlation with the upper flotation potential limit. It is believed that more detailed and properly controlled comparative flotation studies of the chalcocite-xanthate and cuprite-xanthate systems could help to resolve some of the uncertainties associated with the effects of Eh, pH and oxygen concentration in sulphide mineral flotation. © 1979.