OPTIMIZATION OF INJECTION-MOLDING DESIGN .1. GATE LOCATION OPTIMIZATION

The placement of a gate in an injection mold is one of the most important variables of the total mold design. The quality of the molded part is greatly affected by the gate location, because it influences the manner in which the plastic flows into the mold cavity. Some defects, such as weldline and overpack, can be effectively controlled only by the gate location. Therefore, the product quality can be greatly improved by determining the optimum gate location. In this paper, we develop a general methodology for gate location optimization. We first quantify quality in terms of flow simulation outputs. We can thus assess detrimental effects such as warpage and dimensional instability as a function of the independent variable, which is in this case the gate location. Next we develop methods to search for the optimum gate location. The search method introduced in this paper is a method that combines a deterministic hill climbing search with a stochastic annealing search method. The method is appropriately called simulated annealing and hill climbing (SANHIL). The criteria used for evaluation during the search process are a function of the flow simulation outputs. We demonstrate the success of the method for a complex industrial mold. The approach is applicable to any complex mold geometry and any plastic. Copyright © 1990 Society of Plastics Engineers