HIGH-TEMPERATURE LOW-CYCLE BIAXIAL FATIGUE OF 2 STEELS

被引：64

作者：

BROWN, MW

MILLER, KJ

机构：

[1] Department of Mechanical Engineering, University of Sheffield, Sheffield, S1 3JD, Mappin Street

来源：

FATIGUE OF ENGINEERING MATERIALS AND STRUCTURES | 1979年 / 1卷 / 02期

关键词：

D O I：

10.1111/j.1460-2695.1979.tb00379.x

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Abstract— Biaxial low cycle fatigue tests at various temperatures and strain rates were performed on 1% Cr‐Mo‐V steel and AISI 316 stainless steel under combined torsional and axial loads. A correlation for fatigue strength has been derived, and it is also shown that if the Gough ellipse quadrant criterion is rephrased in terms of strain amplitudes, it may be used as a safe design rule for ductile metals in both the low and high cycle fatigue regimes. Copyright © 1979, Wiley Blackwell. All rights reserved

引用

页码：217 / 229

页数：13

共 21 条

[1]

(1974)

[2]

Gonyea D.C., pp. 678-687, (1973)

[3]

Brown M.W., Miller K.J., A theory for fatigue failure under multiaxial stress‐strain conditions, Proc. Instn mech. Engrs, 187, pp. 745-755, (1973)

[4]

Kikukawa M., Ohji K., Kotani S., Yokoi T., A comparison of axial and reversed torsional strain cycling low cycle fatigue strength of several structural metals, Bull. J.S.M.E., 15, pp. 889-898, (1972)

[5]

Gough H.J., Pollard H.V., Clenshaw W.J., (1951)

[6]

Forrest P.G., Fatigue of Metals, (1962)

[7]

Coffin L.F., Fatigue at high temperature—prediction and interpretation, Proc. Instn mech. Engrs, 188, pp. 109-127, (1974)

[8]

Brown M.W., (1975)

[9]

Brown M.W., Miller K.J., Proc. Instn mech. Engrs, 187, (1973)

[10]

Kanazawa K., Miller K.J., Brown M.W., Low‐cycle fatigue under out‐of‐phase loading conditions, Trans. Am. Soc. mech. Engrs. J. Engng Mat. Tech., 99, H, pp. 222-228, (1977)

← 1 2 3 →