TRIBOLOGICAL BEHAVIOR OF METAL MATRIX COMPOSITES

The wear and friction behavior of continuous graphite fiber reinforced metal matrix composites was investigated. Composite materials were tested against 4620 steel at 54 m s-1 at room temperature in air without lubricant. The graphite fibers studied included rayon-, pitch- and polyacrilonitrile (PAN)-based fibers. Both high modulus and high strength PAN-based fibers were examined. The fibers were incorporated into copper- and silver-based alloys by means of a liquid metal infiltration technique. The results of this study indicate that the type of graphite fiber in the composite is the most significant factor in the wear and friction behavior of metal matrix composites. In some high modulus fiber tin-bronze composites the fiber fraction influences the wear rate but not the coefficient of friction. Neither the matrix alloy nor the composite tensile strength per se correlate with the friction and wear properties; however, there are specific trends for the various matrix alloys. © 1979.