REPROCESSING OF LIQUID-CRYSTAL POLYMERS - EFFECTS ON STRUCTURE AND MECHANICAL-PROPERTIES

被引：19

作者：

BASTIDA, S ^{[1
]}

EGUIAZABAL, JI ^{[1
]}

NAZABAL, J ^{[1
]}

机构：

[1] UNIV BASQUE COUNTRY, FAC QUIM, DEPT CIENCIA & TECNOL POLIMEROS, SAN SEBASTIAN, SPAIN

来源：

JOURNAL OF APPLIED POLYMER SCIENCE | 1995年 / 56卷 / 11期

关键词：

D O I：

10.1002/app.1995.070561110

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

The effects of reprocessing by successive injection molding cycles on the structure and properties of two thermotropic liquid-crystal polymers (LCPs), namely Rodrun and Vectra, were analyzed. Reprocessing produces a clear decrease in the melt viscosity of both LCPs. This is attributed to molecular weight decreases as a consequence of chemical reactions. The reactions produced chain scission in both LCPs and new products in the case of Vectra. This gave rise to modifications in the crystalline behavior of Vectra that did not take place in the case of Rodrun. All these facts lead to, with the exception of the modulus of elasticity of Rodrun, an overall decrease in properties, more marked in the case of Vectra. (C) 1995 John Wiley & Sons, Inc.

引用

页码：1487 / 1494

页数：8

共 21 条

[1]

Leidner J., Plastics Waste, Recovery of Economic Value, (1981)

[2]

High Performance Polymers, (1991)

[3]

Stuart A., (1992)

[4]

Suenaga J.-I., Polym. News., 15, (1990)

[5]

Thapar H., Bevis M.J., Plast. Rubb. Proc. Appl., 12, (1989)

[6]

Hsiung C.M., Tian J., Cakmak M., Detailed Investigations of Structural Layering Phenomena in Injection Molded Thermotropic LCP, International Polymer Processing, 8, (1993)

[7]

Eguiazabal J.I., Nazabal J., Effect of reprocessing on the properties of bisphenol-a polycarbonate, European Polymer Journal, 25, (1989)

[8]

Eguiazabal J.I., Nazabal J., Reprocessing polycarbonate/acrylonitrile-butadiene-styrene blends: Influence on physical properties, Polymer Engineering and Science, 30, (1990)

[9]

Arzak A., Eguiazabal J.I., Nazabal J., Plast. Rubb. Comp. Proc. Appl., 15, (1991)

[10]

Sanchez P., Remiro P.M., Nazabal J., Influence of reprocessing on the mechanical properties of a commercial polysulfone/polycarbonate blend, Polymer Engineering and Science, 32, (1992)

← 1 2 3 →