AN AES INVESTIGATION OF THE SURFACE-FILMS FORMED ON STRESS-CORROSION TEST SPECIMENS OF TYPE-304 STAINLESS-STEEL IN HIGH-TEMPERATURE WATER

被引：15

作者：

YANG, W ^{[1
]}

ZHAO, GZ ^{[1
]}

ZHANG, MJ ^{[1
]}

CONGLETON, J ^{[1
]}

机构：

[1] UNIV NEWCASTLE UPON TYNE,DEPT MECH MAT & MFG ENGN,DIV MAT,NEWCASTLE TYNE NE1 7RU,TYNE & WEAR,ENGLAND

来源：

CORROSION SCIENCE | 1992年 / 33卷 / 01期

关键词：

D O I：

10.1016/0010-938X(92)90019-Y

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The composition of the oxides formed on 304 stainless steel stress corrosion specimens in high temperature waters have been measured by AES. The compositions of the films varied with water chemistry and temperature and were different for slow strain rate and U-bend specimens. The thickness of the oxide and enhancement of chromium in the films decreased with increasing chloride in the water. For U-bend specimens, the resistance to cracking increased with increasing film thickness and with the chromium contents of the films but thick films and high chromium contents gave less resistance to cracking for slow strain rate tests.

引用

页码：89 / 102

页数：14

共 19 条

[1]

ANDRESON PL, 1982, NP2424LD EPRI

[2]

CHEN JF, 1989, CORROS ENG, V38, P227

[3] THE STRESS-CORROSION CRACKING BEHAVIOR OF ANNEALED 316-STAINLESS STEEL IN LOW OXYGEN 5 PPM CHLORIDE CONTENT WATER AT 300-DEGREES-C [J].