FINITE-ELEMENT PREDICTION OF CHIP GEOMETRY AND TOOL WORKPIECE TEMPERATURE DISTRIBUTIONS IN ORTHOGONAL METAL-CUTTING

被引：143

作者：

STRENKOWSKI, JS

MOON, KJ

机构：

[1] North Carolina State University, Department of Mechanical and Aerospace Engineering, Raleigh, NC, 27695-7910

来源：

JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME | 1990年 / 112卷 / 04期

关键词：

D O I：

10.1115/1.2899593

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

An Eulerian finite element model is presented that simulates orthogonal metal cutting. The model predicts chip geometry and temperature distribution in the workpiece, chip, and tool without the need for empirical cutting data. With the capability to predict chip geometry, the tool-chip contact length can also be found. Characteristics of the flow field in the vicinity of the tool can also be determined, such as the material velocity, and the stress and strain-rate distributions. It was found that the shear stress occurs over a finite region in front of the tool, rather than a single shear plane. Cutting experiments were performed for aluminum alloy 6061-T6 to validate the model. Good correlation with the model was found based on tool forces and average tool-chip interface temperature measurements. © 1990 by ASME.

引用

页码：313 / 318

页数：6

共 20 条

[1]

Piispanen V., Tekmillinen Tikakanslehti, 27, (1937)

[2]

Ernst H., Merchant M.E., Chip Formation, Friction, and Finish, (1941)

[3]

Lee E.H., Shaffer B.W., “The Theory of Plasticity Applied to a Problem of Machining, ASME Journal of Applied Mechanics, 73, pp. 404-413, (1951)

[4]

Fenton R.G., Oxley P., Mechanics of Orthogonal Machining: Allowing for the Effects of Strain-Rate and Temperature on Tool-Chip Friction, Proc. Inst, of Mech. Engrs, 183, (1968)

[5]

Zorev N.N., Results of Work in the Field of the Mechanics of the Metal Cutting Process, (1958)

[6]

Boothroyd G., Bailey J.A., Effects of Strain Rate and Temperature in Orthogonal Metal Cutting, J. Mech. Engng. Sei, 8, 3, pp. 264-277, (1966)

[7]

Lajczok M.R., A Study of Some Aspects of Metal Machining Using the Finite Element Method, (1980)

[8]

Usui E., Shirakashi T., Mechanics of Machining-From ‘Descriptive’ to ‘Predictive’ Theory, On the Art of Cutting Metals-75 Years Later, 7, pp. 13-35, (1982)

[9]

Iwata K., Osakada K., Terasaka Y., Process Modeling of Orthogonal Cutting by the Rigid-Plastic Finite Element Method, ASME J. Engng. Mail, and Tech, 106, pp. 132-138, (1984)

[10]

Strenkowski J.S., Carroll J.T., A Finite Element Model of Orthogonal Metal Cutting, ASME Journal of Engineering for Industry, 107, pp. 346-354, (1985)

← 1 2 →