DEVELOPMENT OF A DEFINITIVE METHOD FOR IODINE SPECIATION IN AQUATIC SYSTEMS

A definitive method of isotope dilution mass spectrometry (IDMS) was developed to determine four different iodine species in aquatic systems (iodide, iodate and two organoiodine compounds: one of the organic species is chromatographically elutable from a column filled with an anion exchanger resin, the other one is not). The iodine species were analysed after the isotope dilution step with an enriched 129I spike and after their chromatographic separation. The total iodine concentration was measured after decomposition of organic compounds in the aquatic system by UV irradiation. Different types of natural water samples (river water, water of a pond, moorland lake water) were analysed and important water parameters like pH-value, redox potential, oxygen content and dissolved organic carbon were measured for each of these samples. The total iodine concentration in the different samples differed only slightly in the range of 2-7 μg/l. In most of the moorland lake water samples only the two organoiodine species could be detected. In these samples the concentration of iodide and iodate was less than the detection limit of 0.5 μg/l and 0.1 μg/l, respectively. On the other hand, all four iodine species could be determined in most of the river water samples. Positive correlations were found for the oxygen content of the water samples and the iodate concentration as well as for the redox potential and the anionic organoiodine compound. © 1990 Springer-Verlag.