STRUCTURAL AND CHEMICAL DISORDER NEAR THE Y2BACUO5/YBA2CU3O7-DELTA INTERFACE AND ITS POSSIBLE RELATION TO THE FLUX-PINNING BEHAVIOR IN MELT-TEXTURED YBA2CU3O7-DELTA

被引:120
作者
WANG, ZL
GOYAL, A
KROEGER, DM
机构
[1] Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
来源
PHYSICAL REVIEW B | 1993年 / 47卷 / 09期
关键词
D O I
10.1103/PhysRevB.47.5373
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Transmission-electron microscopy and energy-dispersive x-ray spectroscopy were used to study the microstructure of the YBa2Cu3O7-delta (1:2:3) region adjacent to the Y2BaCuO5/YBa2Cu3O7-delta (2:1:1/1:2:3) interface. It is found that there exists a high local density of stacking faults in 1:2:3, near the 2:1:1/1:2:3 interfaces. The stacking faults lie parallel to the (001) basal plane and are inhomogeneously distributed around the 2:1:1 particles. They tend to be disk shaped with diameters ranging from a few to approximately 30 nm. Calculations made using simple energy considerations suggest that these stacking faults may act as effective flux pinners for magnetic fields directed both parallel and perpendicular to the basal plane. They may account for the observed increase of J(c) with volume fraction of 2:1:1 and also explain the angular dependence of transport J(c) in melt-processed 1:2:3. An unusual tendency for the formation of facets on the incoherent, randomly oriented 2:1:1 particles parallel to the {001}-type planes in the 1:2:3 matrix was also observed. Microanalysis of the 1:2:3 region around the 2:1:1 particles, which contain few or no stacking faults, consistently shows an enrichment of Y and a corresponding depletion in Ba concentration. Such cation nonstoichiometry may result in the formation of numerous point defects, which could also result in pinning. The presence of ledges on some facets at the 2:1:1/1:2:3 interfaces and the observed compositional nonstoichiometry in the 1:2:3 phase in the vicinity of these interfaces suggest that 2:1:1 particles continue to change in size after entrapment in 1:2:3. The observed compositional variation is consistent with dissolution of trapped 2:1:1. Such diffusion effects and stresses due to he thermal and elastic mismatch between 2:1:1 and 1:2:3 provide mechanisms for generating the oberved defects aroung the 2:1:1 particles in the 1:2:3 matrix.
引用
收藏
页码:5373 / 5382
页数:10
相关论文
共 47 条
[1]   MICROSTRUCTURE WITHIN DOMAINS OF MELT-PROCESSED YBA2CU3O7-X SUPERCONDUCTORS [J].
ALEXANDER, KB ;
GOYAL, A ;
KROEGER, DM ;
SELVAMANICKAM, V ;
SALAMA, K .
PHYSICAL REVIEW B, 1992, 45 (10) :5622-5627
[2]   THEORY OF FLUX CREEP IN HARD SUPERCONDUCTORS [J].
ANDERSON, PW .
PHYSICAL REVIEW LETTERS, 1962, 9 (07) :309-&
[3]   FLUX VORTICES AND TRANSPORT CURRENTS IN TYPE II SUPERCONDUCTORS [J].
CAMPBELL, AM ;
EVETTS, JE .
ADVANCES IN PHYSICS, 1972, 21 (90) :199-+
[4]   STRUCTURAL ANOMALIES, OXYGEN ORDERING AND SUPERCONDUCTIVITY IN OXYGEN DEFICIENT BA2YCU3OX [J].
CAVA, RJ ;
HEWAT, AW ;
HEWAT, EA ;
BATLOGG, B ;
MAREZIO, M ;
RABE, KM ;
KRAJEWSKI, JJ ;
PECK, WF ;
RUPP, LW .
PHYSICA C, 1990, 165 (5-6) :419-433
[5]  
CHRISTEN D, UNPUB
[6]   EFFECTS OF THERMAL-PROCESSING AND OXYGEN COMPOSITION ON FLUX PINNING IN HIGH-JC EPITAXIAL Y1BA2CU3O7-X THIN-FILMS [J].
CHRISTEN, DK ;
FEENSTRA, R .
PHYSICA C, 1991, 185 :2225-2226
[7]   DEFECT INDEPENDENCE OF THE IRREVERSIBILITY LINE IN PROTON-IRRADIATED Y-BA-CU-O CRYSTALS [J].
CIVALE, L ;
MARWICK, AD ;
MCELFRESH, MW ;
WORTHINGTON, TK ;
MALOZEMOFF, AP ;
HOLTZBERG, FH ;
THOMPSON, JR ;
KIRK, MA .
PHYSICAL REVIEW LETTERS, 1990, 65 (09) :1164-1167
[8]  
Dinger T. R., 1989, High Temperature Superconducting Compounds: Processing and Related Properties. Proceedings of the 1989 Symposium, P23
[9]   A LIGHT AND ELECTRON-MICROSCOPIC STUDY OF THE PINEAL-GLAND OF THE VISCACHA (LAGOSTOMUS-MAXIMUS-MAXIMUS) [J].
DOMINGUEZ, S ;
PIEZZI, RS ;
SCARDAPANE, L ;
GUZMAN, JA .
JOURNAL OF PINEAL RESEARCH, 1987, 4 (02) :211-219
[10]   HIGH-TRANSPORT CURRENT-DENSITY UP TO 30-T IN BULK YBA2CU3O7 AND THE CRITICAL ANGLE EFFECT [J].
EKIN, JW ;
SALAMA, K ;
SELVAMANICKAM, V .
APPLIED PHYSICS LETTERS, 1991, 59 (03) :360-362