ONLINE PRECONCENTRATION OF INORGANIC MERCURY AND METHYLMERCURY IN SEA-WATER BY SORBENT EXTRACTION AND TOTAL MERCURY DETERMINATION BY COLD VAPOR ATOMIC-ABSORPTION SPECTROMETRY

A comparative study of three mercury chelate forming reagents [diethyldithiocarbamate, pyrrolidin-1-yldithioformate and diphenylthiocarbazone (dithizone)] has been carried out for the preconcentration of ultratrace amounts of inorganic mercury and methylmercury in silica C-18 minicolumns as the solid sorbent. Sample flow injection in-line sorbent extraction was coupled with continuous cold vapour atomic absorption spectrometry (CVAAS) for detection. Results showed the superiority of the carbamate type reagents over the dithizone for the on-line formation and preconcentration of the corresponding mercury chelates. Using diethyldithiocarbamate (DDC) as reagent, aqueous sample volumes of 100 ml can be preconcentrated with 100% efficiency for both inorganic mercury and methylmercury. Quantitative release of the retained DDC chelates was obtained for volumes of eluent (ethanol) of 50 mu l. Following the proposed procedure, detection limits of 16 ng/l. of mercury were achieved for sample volumes of 25 ml. The relative standard deviation was +/-3.4% at 0.5% mu g/l. Hg(II) levels. The method has been successfully applied to the determination of low levels of mercury in sea-water.