THE SYNTHESIS OF MANIPULATORS WITH PRESCRIBED WORKSPACE

被引：44

作者：

GOSSELIN, CM

GUILLOT, M

机构：

[1] Département de Génie Mécanique, Université Laval, Ste-Foy, QC

来源：

JOURNAL OF MECHANICAL DESIGN | 1991年 / 113卷 / 04期

关键词：

D O I：

10.1115/1.2912804

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper presents an algorithm for the optimization of the workspace of planar manipulators. The objective is to be able to synthesize manipulators whose workspace is as close as possible of being equal to a prescribed working area. The procedure begins with a geometric description of both the desired and the actual workspaces. Methods of computing the intersection of these regions are then developed. Finally, the optimization aims at minimizing the area of the regions contained in one of the workspaces-prescribed or actual-but not in the other. Results obtained with serial and parallel planar manipulators are shown and the possibility of extending the method to spatial cases is considered.

引用

页码：451 / 455

页数：5

共 14 条

[1]

Box M.J., A new method of constrained optimization and a comparison with other methods, Computer Journal, 8, pp. 42-52, (1965)

[2]

Brand L., Advanced Calculus, pp. 355-361, (1955)

[3]

Chedmail P., Wenger P., Design and positioning of a robot in an environment with obstacles using optimal search, Proceedings of the IEEE International Conference on Robotics and Automation, pp. 1069-1074, (1989)

[4]

Gosselin C., Determination of the workspace of 6-dof parallel manipulators, ASME Journal of Mechanicai Design, 112, 3, pp. 331-336, (1990)

[5]

Gosselin C., Angeles J., The optimum kinematic design of a planar three-degree-of-freedom parallel manipulator, ASME Journal of Mechanisms, Transmissions, and Automation in Design, 110, 1, pp. 35-41, (1988)

[6]

Gupta K.C., On the nature of robot workspace, The International Journal of Robotics Research, 5, 2, pp. 112-121, (1986)

[7]

Gupta K.C., Roth B., Design considerations for manipulators workspace, ASME Journal of Mechanical Design, 104, 3, pp. 704-711, (1982)

[8]

Hansen J.A., Gupta K.C., Kazerounian S., Generation and evaluation of the workspace of a manipulator, The International Journal of Robotics Research, 2, 3, pp. 22-31, (1983)

[9]

Kohli D., Spanos J., Workspace analysis of mechanical manipulators using polynomial discriminants, ASME Journal of Mechanisms, Transmissions, and Automation in Design, 107, 2, pp. 209-215, (1985)

[10]

Lin C.-C.D., Freudenstein F., Optimization of the workspace of a three-link turning-pair connected robot arm, The International Journal of Robotics Research, 5, 2, pp. 104-111, (1986)

← 1 2 →