MEASUREMENT OF THE ELASTIC-MODULUS OF FIBER-REINFORCED COMPOSITES USED AS ORTHODONTIC WIRES

The mechanical properties of an orthodontic wire pultruded from S2-glass-reinforced polyethyleneterephthalate glycol (PETG) were measured using two experimental devices simulating clinical conditions. A comparison of moduli measured in the clinically relevant devices with those measured in a standard flexural test reveals that data obtained using small cross-section, short span length clinical specimens require corrections associated with clamping and shearing effects. The clamping effect dominates and is caused by the softening of the material near the clamps. The shear effect becomes important at high fibre volume fractions and small span/thickness ratios. With adoption of these corrections, good agreement between moduli calculated using rule of mixtures and those measured in clinical tests is achieved. The analytical base developed for prediction of the stiffness of the orthodontic wire for different span/thickness ratios improves the procedure for design of dental appliances.