STEM CURVATURE AND LOAD ANGLE INFLUENCE THE INITIAL RELATIVE BONE-IMPLANT MOTION OF CEMENTLESS FEMORAL STEMS

A 6 df measurement system was used to investigate the initial relative bone-implant motion of two types of cementless total hip replacement femoral components-a straight stem and a curved stem. Five pairs of fresh frozen femurs from human cadavers were tested with loads applied to the femoral head at angles characteristic of level walking, stair-climbing, and rising from a chair. The most important findings were that (a) the resultant proximal translations were twice as high with the straight stem as with the curved stem at load angles encountered in stair-climbing and rising from a chair, (b) both stem types had more motion at load angles encountered in stair-climbing and rising from a chair than in level walking, with the increases ranging from 3 to 14-fold, (c) there was as much as 66-fold more motion distally than proximally, and (d) the amount of interface motion varied by 5-fold between the medial and lateral surfaces of the distal part of the implant because of the combined effects of translation and rotation. The amount of initial bone-implant motion of the femoral component was found to be particularly sensitive to off-axis loading; this suggests that stair-climbing and rising from a chair should be avoided in the early postoperative period when a cementless porous-coated femoral stem has been used.