ELASTIC-PLASTIC FRACTURE-MECHANICS FOR INITIATION AND PROPAGATION OF NOTCH FATIGUE CRACKS

被引：79

作者：

HAMMOUDA, MM

SMITH, RA

MILLER, KJ

机构：

来源：

FATIGUE OF ENGINEERING MATERIALS AND STRUCTURES | 1979年 / 2卷 / 02期

关键词：

D O I：

10.1111/j.1460-2695.1979.tb01350.x

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Abstract Initiation and propagation are considered to be controlled by the extent of total plastic shear deformation φ. Crack initiation and crack propagation occur when φ, exceeds a critical threshold value which can be equated to threshold conditions determined from linear elastic fracture mechanics analyses. When a crack is in a plastically deformed zone φt=φp+φe. where φp is the component of φt due to notch bulk plasticity and φe, is the component of φt due to a linear elastic fracture mechanics (LEFM) analysis of the crack tip plasticity field. When cracks initiate at notch roots φt > φth. As the crack propagates in the notch plastic zone the rate of decrease of vp will be different from the rate of increase of φe and it is possible for φt to decrease to a level below φth thereby creating a non‐propagating crack. Copyright © 1979, Wiley Blackwell. All rights reserved

引用

页码：139 / 154

页数：16

共 30 条

[1] Neuber H., (1967)
[2] Stowell E.Z., (1950)
[3] Smith R.A., Jerram K., Miller K.J., Experimental and theoretical fatigue crack propagation lives of various notched plates, J. Strain Analysis, 9, (1974)
[4] Smith R.A., Miller K.J., Fatigue cracks at notches, Int. J. Mech. Sci., 19, (1977)
[5] Smith R.A., Miller K.J., Prediction of fatigue regimes in notched components, Int. J. Mech. Eng. Sci., 20, (1978)
[6] Neuber H., Theory of Notch Stresses, (1946)
[7] Neuber H., Theory of stress concentration for shear strained prismatical bodies with arbitrary non‐linear stress‐strain law, Journal of Applied Mechanics, 28, (1961)
[8] Newman J.C., (1971)
[9] Hammouda M.M.I., (1978)
[10] Yamada Y., Yoshimura N., Plastic stress‐strain matrix and its application for the solution of elastic‐plastic problems by the finite element method, Int. J. Mech. Sci., 10, (1968)

← 1 2 3 →