DYNAMIC MECHANICAL-PROPERTIES OF STRAIGHT TITANIUM-ALLOY ARCH WIRES

被引：17

作者：

KUSY, RP

WILSON, TW

机构：

[1] the Dental Research Center, presently employed at Camille Dreyfus Laboratories, Research Triangle Institute, Research Triangle Park, NC

来源：

DENTAL MATERIALS | 1990年 / 6卷 / 04期

关键词：

D O I：

10.1016/S0109-5641(05)80003-X

中图分类号：

R78 [口腔科学];

学科分类号：

1003 ;

摘要：

Eight straight-wire materials were studied: an orthodontic titanium-molybdenum (Ti-Mo) product, TMA™; three orthodontic nickel-titanium (Ni-Ti) products, Nitinol™, Titanal™, and Orthonol™; three prototype alloys, a martensitic, an austenitic, and a biphasic alloy; and a hybrid shape-memory-effect product, Biometal™. Each wire was prepared with a length-to-cross-sectional area of at least 3600 cm-1. With an Autovibron Model DDV-II-C used in the tensile mode, each sample was scanned from -120 to +200°C at 2°C/min. From the data base, plots of the log storage modulus, log tan delta, and percent change in length vs. temperature were generated. Results showed that the dynamic mechanical properties of the alloys within this Ti system are quite different. The Ti-Mo alloy, TMA™, was invariant with temperature, having a modulus of 7.30 × 1011 dyne/cm2 (10.6 × 106 psi). The three cold-worked alloys - Nitinol™, Titanal™, and Orthonol™ - appeared to be similar, having a modulus of 5.74 × 1011 dyne/cm2 (8.32 × 106 psi). The biphasic shape-memory alloy displayed a phase transformation near ambient temperature; whereas the hybrid shape-memory product, Biometal™, underwent a 3-5% change in length during its transformation between 95 and 125°C. Among the Ni-Ti wires tested, several different types of alloys were represented by this intermetallic material. © 1990.

引用

页码：228 / 236

页数：9

共 49 条

[1]

Andreasen, A Clinical Trial of Alignment of Teeth Using a 0.019 Inch Thermal Nitinol Wire with a Transition Temperature Range Between 31°C and 45°C, Am J Orthod, 78, pp. 528-537, (1980)

[2]

Andreasen, Hileman, An Evaluation of 55-cobalt Substituted Wire for Orthodontics, J Am Dent Assoc, 82, pp. 1373-1375, (1971)

[3]

Andreasen, Hileman, Krell, Stiffness Changes in Thermodynamic Nitinol with Increasing Temperature, Angle Orthod, 55, pp. 120-126, (1985)

[4]

Andreasen, Morrow, Laboratory and Clinical Analyses of Nitinol Wire, Am J Orthod, 73, pp. 142-151, (1978)

[5]

Asgharnia, Brantley, Comparison of Bending and Tension Tests for Orthodontic Wires, Am J Orthod, 89, pp. 228-235, (1986)

[6]

Buehler, Wiley, TiNi — Ductile Intermetallic Compound, Trans ASM, 55, pp. 269-276, (1962)

[7]

Burstone, Variable-modulus Orthodontics, Am J Orthod, 80, pp. 1-16, (1981)

[8]

Burstone, Goldberg, Beta-titanium: A New Orthodontic Alloy, Am J Orthod, 77, pp. 121-132, (1980)

[9]

Burstone, Qin, Morton, Chinese NiTi Wire—A New Orthodontic Alloy, Am J Orthod, 87, pp. 445-452, (1985)

[10]

Collings, The Physical Metallurgy of Titanium Alloys, pp. 156-160, (1984)

← 1 2 3 4 5 →