EARLY STAGES OF YIELDING AND STRAIN AGING OF A VANADIUM-CONTAINING DUAL-PHASE STEEL

被引:91
作者
DAVIES, RG
机构
[1] Metallurgy Department, Research Staff, Ford Motor Company, Dearborn, 48121, MI
来源
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 1979年 / 10卷 / 10期
关键词
D O I
10.1007/BF02812021
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A study has been made of the early stages of yielding, 10-5 to 10-2 plastic strain range, of a vanadium containing dual-phase steel as a function of pct martensite, pct prestrain and aging time and temperature. It is found that the 10-5 yield stress is independent of the pct martensite, while the 10-3 flow stress is proportional to, and increases rapidly with the martensite content. For dual-phase steels of commercial interest (15 to 25 pct martensite content), it is concluded that the yield behavior is controlled by the free dislocations introduced into the ferrite matrix when the austenite regions transform to martensite and their subsequent interaction with the martensite regions. While straining increases the microyield stresses and aging increases both the micro and macroyield stresses, these processes are not additive in a strained plus aged specimen. The activation energy for the production of a yield point plateau was determined to be about 33 kcal/mol. It is proposed that this high value is a result of carbon atoms interacting with vanadium rich clusters which remain in the structure after vanadium carbide precipitates are dissolved during intercritical annealing. © 1979 The Metallurgical of Society of AIME.
引用
收藏
页码:1549 / 1555
页数:7
相关论文
共 21 条
[1]  
BUCHER JH, 1977, SAE770164 PREPR
[2]  
DAVIES RG, 1966, T METALL SOC AIME, V236, P1691
[3]   MECHANICAL-PROPERTIES OF ZERO-CARBON FERRITE-PLUS-MARTENSITE STRUCTURES [J].
DAVIES, RG .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1978, 9 (03) :451-455
[4]   INFLUENCE OF MARTENSITE COMPOSITION AND CONTENT ON PROPERTIES OF DUAL PHASE STEELS [J].
DAVIES, RG .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1978, 9 (05) :671-679
[5]  
DAVIES RG, 1978, METALL TRANS A, V9, P41, DOI 10.1007/BF02647169
[6]  
DIJKSTRA LJ, 1953, T AM I MIN MET ENG, V197, P69
[7]  
FAST JD, 1953, PHILIPS RES REP, V8, P1
[8]  
FINE TE, 1978, SAE780136 PREPR
[9]  
FOUNTAIN RW, 1958, T AM I MIN MET ENG, V212, P737
[10]  
Hayami S, 1975, P S HIGH STRENGTH LO, P78