MORPHOLOGY AND BARRIER PROPERTIES OF ORIENTED BLENDS OF POLY(ETHYLENE-TEREPHTHALATE) AND POLY(ETHYLENE 2,6-NAPHTHALATE) WITH POLY(ETHYLENE-CO-VINYL ALCOHOL)

Morphology and oxygen permeability studies were carried out for blends of poly(ethylene terephthalate), PET, and poly(ethylene 2,6-naphthalate), PEN, with poly(ethylene-co-vinyl alcohol), EVOH. PET/EVOH blends are seen as a possible substitute for poly(vinylidene chloride)-coated PET packaging films. The effects of several processing parameters such as draw temperature and draw ratio on blend morphology and barrier properties suggest that the morphology of the EVOH phase dictates to a large extent the oxygen permeabilities of these blends. The relationships between morphology and oxygen permeability are explained by consideration of two-phase conduction models. The model of Fricke is found to be a good predictor of the barrier properties of the PET/EVOH system. The oxygen permeability of PET was reduced by a factor of 4.2 with the addition of 20 wt% EVOH and that of PEN by a factor of 2.7 with the addition of 15 wt% EVOH. Water vapor permeabilities and mechanical properties of PET and PEN were only slightly affected by the addition of 15 wt% EVOH.