RHEOLOGY OF POROUS ALUMINA AND SIMULATION OF HOT ISOSTATIC PRESSING

被引:58
作者
BESSON, J
ABOUAF, M
机构
[1] Ecole Nationale Supérieure des Mines de Paris, Centre des Matériaux P.M. Fourt, Evry
关键词
D O I
10.1111/j.1151-2916.1992.tb04479.x
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Rheology of a porous alumina was studied using sinter-forging, hot-pressing, and sintering tests. The results are analyzed using constitutive equations for porous materials. The deformation and densification rates are found to follow Coble creep behavior with an eventual control by interface reactions. The effect of porosity on shear and densification behavior is studied and compared to results obtained on metal powders showing similar trends for shear and a stronger influence in the case of densification. Large pores are likely to buckle at low densities when external forces are applied. The sintering pressure is also estimated and lies in the range 0 to 3 MPa. Finally, the constitutive equations are used to simulate hot isostatic pressing of test shapes, showing that the proposed model correctly predicts the deformation of the ceramic preforms.
引用
收藏
页码:2165 / 2172
页数:8
相关论文
共 43 条
[1]   INTERFACE CONTROLLED DIFFUSIONAL CREEP [J].
ARZT, E ;
ASHBY, MF ;
VERRALL, RA .
ACTA METALLURGICA, 1983, 31 (12) :1977-1989
[2]   PRACTICAL APPLICATIONS OF HOT-ISOSTATIC PRESSING DIAGRAMS - 4 CASE STUDIES [J].
ARZT, E ;
ASHBY, MF ;
EASTERLING, KE .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1983, 14 (02) :211-221
[3]   THE INFLUENCE OF AN INCREASING PARTICLE COORDINATION ON THE DENSIFICATION OF SPHERICAL POWDERS [J].
ARZT, E .
ACTA METALLURGICA, 1982, 30 (10) :1883-1890
[4]   ON INTERFACE-REACTION CONTROL OF NABARRO-HERRING CREEP AND SINTERING [J].
ASHBY, MF .
SCRIPTA METALLURGICA, 1969, 3 (11) :837-&
[5]   GRAIN-GROWTH ENHANCEMENT IN ALUMINA DURING HOT ISOSTATIC PRESSING [J].
BESSON, J ;
ABOUAF, M .
ACTA METALLURGICA ET MATERIALIA, 1991, 39 (10) :2225-2234
[6]   MICROSTRUCTURAL CHANGES IN ALUMINA DURING HOT ISOSTATIC PRESSING [J].
BESSON, J ;
ABOUAF, M .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1989, 109 :37-43
[7]   BEHAVIOR OF CYLINDRICAL HIP CONTAINERS [J].
BESSON, J ;
ABOUAF, M .
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1991, 28 (06) :691-702
[8]  
BESSON J, 1989, 2ND INT C HOT IS PRE
[9]  
BESSON J, 1990, THESIS ECOLE MINES P
[10]   ON CONSTRAINED SINTERING .2. COMPARISON OF CONSTITUTIVE MODELS [J].
BORDIA, RK ;
SCHERER, GW .
ACTA METALLURGICA, 1988, 36 (09) :2399-2409