FABRICATION AND CHARACTERIZATION OF POLYMER-DERIVED SI2N2O-ZRO2 NANOCOMPOSITE CERAMICS

被引：15

作者：

SGLAVO, VM ^{[1
]}

DALMASCHIO, R ^{[1
]}

SORARU, GD ^{[1
]}

BELLOSI, A ^{[1
]}

机构：

[1] CNR,IST RICERCHE TECNOL CERAM,I-48018 FAENZA,ITALY

来源：

JOURNAL OF MATERIALS SCIENCE | 1993年 / 28卷 / 23期

关键词：

D O I：

10.1007/BF01352209

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Amorphous Si-Zr-N-O powders, obtained by nitridation in an NH3 flow of zirconium modified polycarbosilane, have been sintered to full density by hot pressing at 1500-degrees-C. The resulting ceramic shows an extremely fine-grained microstructure composed of Si2N2O and ZrO2 crystallites 20-30 nm in diameter. Thermal stability measured in air appears excellent up to 1300-degrees-C for 48 h. Mechanical characterization pointed out good values of flexural strength (330 M Pa), fracture toughness (4.1 MPa m0.5) and Weibull modulus.

引用

页码：6437 / 6441

页数：5

共 32 条

[1] SI3N4-AL2O3-ZRO2 HOT-PRESSED COMPOSITES [J].

BELLOSI, A ;

VINCENZINI, P ;

BABINI, GN .

MATERIALS CHEMISTRY AND PHYSICS, 1987, 18 (03) :205-229

[2]

BENDER BA, 1989, J AM CERAM SOC, V70, pC58

[3]

Billy M., 1981, Ceramics International, V7, P13, DOI 10.1016/0272-8842(81)90033-X

[4]

Boch P., 1983, Progress in Nitrogen Ceramics. Proceedings of the NATO Advanced Study Institute, P589

[5]

CLAUSSEN N, 1978, J AM CERAM SOC, V61, pC94

[6] SI3N4-ZRO2 COMPOSITES WITH SMALL AL2O3 AND Y2O3 ADDITIONS PREPARED BY HIP [J].

EKSTROM, T ;

FALK, LKL ;

KNUTSONWEDEL, EM .

JOURNAL OF MATERIALS SCIENCE, 1991, 26 (16) :4331-4340

[7]

GLANDUS JC, 1977, NITROGEN CERAMICS, P515

[8]

HEUR AH, 1982, J AM CERAM SOC, V65, P642

[9]

Huang Z. K., 1984, Ceramics International, V10, P14, DOI 10.1016/0272-8842(84)90017-8

[10]

Jack K. H., 1986, Non-Oxide Technical and Engineering Ceramics. Proceedings of the International Conference, P1

← 1 2 3 4 →