DISLOCATION-STRUCTURES CAUSED BY PLASTIC-DEFORMATIONS IN AN AGED AL-MG-SI ALLOY

被引：13

作者：

BANIZS, K

机构：

[1] ALUTERV-FKI, Budapest

来源：

MATERIALS SCIENCE AND ENGINEERING | 1979年 / 41卷 / 01期

关键词：

D O I：

10.1016/0025-5416(79)90039-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An Al-1.42%Mg2Si alloy produced from high purity metals was investigated. After solution heat treatment at 540°C for 30 min followed by quenching in water at 20°C the alloy was aged at 180°C for different times to obtain varying precipitated (zone?) states. Tensile plastic deformations were carried out between 1% and rupture on these samples. The rupture surfaces were studied by scanning electron microscopy and the dislocation structures by transmission electron microscopy. Correlations were made between microstructure and tensile work-hardening curves. © 1979.

引用

页码：17 / 24

页数：8

共 19 条

[1]

BANIZS K, 1974, MAGY ALUM, V11, P305

[2]

BROWN LM, 1971, DISLOCATION PARTICLE, P9

[3]

CORDIER H, 1965, Z METALLKD, V56, P669

[4]

Cottrell A. H., 1953, DISLOCATIONS PLASTIC

[5] PREAGING EFFECTS IN AL-MG-SI ALLOYS CONTAINING 0.6 TO 0.9 PCT MG2SI [J].

DORWARD, RC .

METALLURGICAL TRANSACTIONS, 1973, 4 (02) :507-512

[6] INFLUENCE OF MN ADDITIONS ON DEFORMATION-BEHAVIOR OF AN AL-MG-SI ALLOY [J].

DOWLING, JM ;

MARTIN, JW .

ACTA METALLURGICA, 1976, 24 (12) :1147-1153

[7]

EMBURY JD, 1973, Z METALLKD, V64, P805

[8]

GEROLD V, 1971, Z METALLKD, V62, P796

[9] 2-STEP AGING BEHAVIORS IN AN AL-1.2WT PERCENT MG2SI ALLOY [J].

HIRATA, T ;

MATSUO, S .

TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1972, 13 (04) :231-&

[10]

HORNBOGEN E, 1967, Z METALLKD, V58, P31

← 1 2 →