SEPARATION OF LIQUID-MIXTURES BY USING POLYMER MEMBRANES .2. WATER-ALCOHOL SEPARATION BY PERVAPORATION THROUGH POROUS PVA MEMBRANES

The permeation and separation characteristics of alcohol/water systems through porous PVA membranes were investigated. Porous PVA membranes with different pore size and number were prepared by solution blending of PVA with several synthesized polymers or copolymers, such as polyacrylic acid, polyacrylamide, polyacrylonitrile, and methylmethacrylate‐co‐maleic anhydride, etc. Then casting, and finally extracting the blended polymers or copolymers by solvent from the membranes. The dependency of both permeation and separation on the molecular size and shape of the permeating species was dicussed qualitatively. Moreover, the permselectivity was investigated with attention to the feed composition of alcohol/water mixture and the effect of pore size and number. The selectivity was found to depend on the weight ratio and the molecular weight of polymer introduced to the membrane. When the weight ratio of polymer introduced into the membrane was larger than 0.1, methanol was permeated through membrane preferentially in methanol/water system, and the separation factor increased with increasing the methanol feed concentration. On the other hand, membrane had a selective permeability for water in the other alcohol/water systems. The influence of operating conditions was also studied. © 1990 Hüthig & Wepf Verlag, Basel