IN-PHANTOM CALIBRATION OF SELECTRON-LDR SOURCES

Source strength measurements were performed for cesium-137 spherical sources of nine Selectron-LDR remote afterloading systems in The Netherlands. The mean reference air kerma rate of a set of sources was obtained from air kerma rate measurements in a phantom at a distance of about 5.5 cm from a large number (24 to 30) of sources. The results were compared with the source strengths specified by the manufacturer. Discrepancies between measured and manufacturers data ranging from - 2.3 % to + 3.9 were observed. The frequency distribution of the strength of the sources within a set was measured by the use of a well-type ionisation chamber. The root mean square deviations of the nine source sets ranged from 1.0 to 3.2%. Application of the in-phantom calibration method would improve the precision of source strength measurements and therefore reduce the differences in dose delivery between institutes. The uncertainty of the in-phantom method, which could be estimated by statistical methods, was 0.3 (one standard deviation). That part of the uncertainty, which could not be evaluated by statistical methods, was estimated to be about 1.2% (one effective standard deviation). This latter part in the uncertainty needs further investigation in order to reduce the overall uncertainty. © 1990.