COATING OF OPTICAL FIBERS WITH A CONICAL SHAPE APPLICATOR

被引：17

作者：

PAEK, UC

SCHROEDER, CM

机构：

[1] Western Electric Company, Engineering Research Center, Princeton, NJ

来源：

FIBER AND INTEGRATED OPTICS | 1979年 / 2卷 / 3-4期

关键词：

D O I：

10.1080/01468037908202107

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

Primary emphasis is placed on the effects of coating parameters such as coating thickness and tip size, the coating thickness variations due to different draw speeds, and induced maximum shear rate in the applicator.However, in this analysis the flow region is divided into two because of the mixed boundary conditions: non-slipcondition (region I) and free shear condition along the meniscus (region II). The surface tension at the edge inregion II is balanced with the pressure difference, which becomes a constraint for the flow rate. © Taylor & Francis Group, LLC.

引用

页码：287 / 298

页数：12

共 9 条

[1] Paek U.C., Spainhoui C.D., Schroeder C.M., Kurkjian C.R., Statisticsof the Strength of Glass Fibers, 1, pp. 1-13, (1978)
[2] Hart A.C., Albarino R.V., An Improved Fabrication Techniquefor Applying Coatings to Optical Fiber Waveguides, pp. 1-2, (1977)
[3] Krause J.T., Kurkjian C.R., Dynamic and Static Fatigue of HighStrength Epoxy-Acrylate Coated Fused Silica Fibers, pp. 1-3, (1977)
[4] Schlichting H., Boundary Layer Theory, (1960)
[5] Spiers R.P., Subbaraman C.V., Wilkinson W.L., Free Coating of aNewtonian Liquid onto a Vertical Surface, Chem. Eng. Sci, 29, pp. 389-396, (1974)
[6] Groenveld P., Van Dortmond R.A., The Shape of the Air InterfaceDuring the Formation of Viscous Liquid Film by Withdrawals, Chem. Eng.Sci, 25, pp. 1571-1578, (1970)
[7] Paek U.C., Runk R.B., Physical Behavior of the Neck-Down RegionDuring the Furnace Drawing of Silica Fibers, J. Appl. Phys, 49, 8, pp. 4417-4422, (1978)
[8] Landau L., Levich B., Dragging of a Liquid by a Moving Plate, A etaPhysiochim. USSR, 17, 1-2, pp. 42-54, (1942)
[9] White D.A., Tallmadge J.A., A Theory of Withdrawal of Cylindersfrom Liquid Baths, J. Aiche, 12, 2, pp. 333-338, (1966)

← 1 →