EXPERIMENTAL METHOD TO DETERMINE EXTENSION OF FRACTURE-PROCESS ZONE

被引:51
作者
Hu, Xiaozhi [1 ]
Wittmann, Folker H. [1 ]
机构
[1] ETH Honggerberg, Lab Bldg Mat, Swiss Fed Inst Tech, CH-8093 Zurich, Switzerland
关键词
D O I
10.1061/(ASCE)0899-1561(1990)2:1(15)
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
A multicutting technique is introduced, which can be used to determine the extension of the fracture-process zone together with the conventional compliance method. A new compliance curve is established from a damaged specimen during multicutting and compared with the compliance-calibration curve. From the comparison of these two compliance curves the extension of the fracture-process zone can be estimated. Experimental results of wedge-opening loaded specimens with a ligament length of 110 mm show that the length of the fracture-process zone in mortar varies from around 43 mm to 12 mm while the crack is approaching to the boundary. A relation between the length of the fracture-process zone and the shape of the K-r-curve is established.
引用
收藏
页码:15 / 23
页数:9
相关论文
共 9 条
[1]  
*ASTM, 1983, ANN BOOK ASTM STAND
[2]  
BRUHWILER E, 1988, THESIS SWISS FEDERAL
[3]   EXPERIMENTAL-DETERMINATION OF THE FRACTURE PROCESS ZONE IN CONCRETE [J].
CEDOLIN, L ;
POLI, SD ;
IORI, I .
CEMENT AND CONCRETE RESEARCH, 1983, 13 (04) :557-567
[4]  
Foote R., 1987, FIBRE REINFORCED CON, P55
[5]  
Hillerborg A., 1976, CEMENT CONCRETE RES, V6, P773, DOI DOI 10.1016/0008-8846(76)90007-7
[6]  
Hillerborg A., 1983, FRACTURE MECH CONCRE, P223
[7]   MEMORY EFFECT OF CRACK RESISTANCE DURING SLOW CRACK-GROWTH IN NOTCHED AL2O3 BEND SPECIMENS [J].
KNEHANS, R ;
STEINBRECH, R .
JOURNAL OF MATERIALS SCIENCE LETTERS, 1982, 1 (08) :327-329
[8]   R-CURVE BEHAVIOR OF A POLYCRYSTALLINE GRAPHITE - MICROCRACKING AND GRAIN BRIDGING IN THE WAKE REGION [J].
SAKAI, M ;
YOSHIMURA, J ;
GOTO, Y ;
INAGAKI, M .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1988, 71 (08) :609-616
[9]  
Wittmann FH, 1985, MATER STRUCT, V18, P93, DOI [10.1007/BF02473374, DOI 10.1007/BF02473374]