SPECIATION OF ARSENIC IN A CONTAMINATED SOIL BY SOLVENT-EXTRACTION

Soil collected from a disused cattle dip in northern New South Wales was studied with the aim of developing an inexpensive, yet effective method for quantitative determination of arsenic(III), arsenic(V) and total organic arsenic in a contaminated soil. Hydrochloric acid extractions were used as a method for removal of the arsenic from the soil in a form suitable for speciation. It was found that the extraction efficiency varied with the ratio of soil to acid, and the concentration of the acid. Arsenic(III), as arsenic trichloride, was selectively extracted into chloroform from a solution highly concentrated in hydrochloric acid. This was followed by back-extraction of the arsenic into water. Total inorganic arsenic was determined in a similar manner after the reduction of arsenic(V) to the trivalent state with potassium iodide. Arsenic(V) was determined by the difference between the results for arsenic(III) and total inorganic arsenic. All analyses for the various arsenic species were performed by hydride generation-atomic absorption spectroscopy; concentrations of total arsenic in the soil were confirmed using X-ray fluorescence spectrometry. It was found that all the arsenic in the soil was present as inorganic arsenic in the pentavalent state. This reflects the ability of arsenic to interchange between species, since the original species in cattle dipping solution is arsenic(III).