PLASMA-BASED SURFACE ENGINEERING PROCESSES FOR WEAR AND CORROSION PROTECTION

被引：35

作者：

MATTHEWS, A

LEYLAND, A

DORN, B

STEVENSON, PR

BINSUDIN, M

REBHOLZ, C

VOEVODIN, A

SCHNEIDER, J

机构：

[1] Research Centre Surface Engineering, University of Hull

来源：

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS | 1995年 / 13卷 / 03期

关键词：

D O I：

10.1116/1.579862

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Vacuum plasma-based coating and treatment methods have considerable potential for reducing wear and corrosion. However, they have not been widely applied to engineering components other than tools such as those used in metal cutting. This is due to several factors, not least of which are cost and an unsuitability for cheaper substrate materials. Here we discuss six plasma-based processing routes that can widen the applicability of these processes and ensure greater market penetration. These methods are: (i) duplex plasma nitriding plus physical vapor deposition (PVD) coating, (ii) lowtemperature plasma diffusion treatment, (iii) postcoat plasma nitriding, (iv) layered diamondlike carbon/metal carbide PVD/chemical vapor deposition coating, (v) thick metal/metal nitride PVD coating, and (vi) duplex electroless nickel plusPVD coating. The characteristics of these methods are discussed, especially with regard to their beneficial influence onwear or corrosion. © 1995, American Vacuum Society. All rights reserved.

引用

页码：1202 / 1207

页数：6

共 25 条

[1]

Matthews A., Hartley R.J., Holiday P., Stevenson P.R., The UK Engineering Coatings Industry in 2005, (1992)

[2]

Leyland A., Fancey K.S., Matthews A., Surf. Eng., 7, (1991)

[3]

Stevenson P.R., Parkin M.A., Leyland A., Matthews A., Surf. Coat. Technol., 63, (1993)

[4]

Leyland A., Lewis D.B., Stevenson P.R., Matthews A., Surf. Coat. Technol., 62, (1993)

[5]

Sun Y., Bell T., Mater. Sci. Eng., A 140, (1991)

[6]

Lewis D.B., Leyland A., Stevenson P.R., Cawley J., Matthews A., Surf. Coat. Technol., 60, (1993)

[7]

Stevenson P.R., University of Hull, (1993)

[8]

Billard A., Foos M., Frantz C., Gantois M., Surf. Coat. Technol., 43/44, (1990)

[9]

Samandi M., Shedden B.A., Smith D.I., Collins G.A., Hutchings R., J. Tendys, Surf. Coat. Technol., 60, (1993)

[10]

Marchev K., Cooper C.V., Blucher J.T., Giessen B.C., Paper presented at the International Conference on Metallurgical Coatings and Thin Films, (1993)

← 1 2 3 →