COALESCENCE OF FRACTURES UNDER SHEAR STRESSES IN EXPERIMENTS

A series of uniaxial compression tests were performed on gypsum specimens with preexisting fractures to study the failure mechanism of fractures and rock bridges in fractured rock masses, The coalescence mechanism of two parallel and offset fractures was investigated by monitoring the process of fracture initiation and propagation with a video camera. The tests showed that two inclined parallel fractures can coalesce by shear failure and/or tensile failure under a uniaxial load. The coalescence path and mechanism mainly depend on the relative position of the two fractures. For instance, when the two fractures are coplanar or slightly offset, coalescence is generated by shear failure; when they are overlapping in the loading direction, coalescence is generated by mixed shear and tensile failure. Two types of preexisting fractures, one without initial surface contact and hence frictionless and another with surface contact and friction, were used to study the influence of fracture contact conditions on the coalescence path and load. It was found that coalescence of fractures with surface contact and friction requires loads as much as 35% higher than that for coalescence of fractures without contact and friction. A stress analysis was conducted in this study to explain the different coalescence mechanisms. The analytical work indicated that different fracture geometries produce significantly different stress fields in the rock bridge area and hence result in different failure modes.