DEVELOPMENT OF LIQUID MEMBRANE PERTRACTION FOR THE REMOVAL AND RECOVERY OF CHROMIUM FROM AQUEOUS EFFLUENTS

Liquid membrane pertraction combines the loading and stripping steps of solvent extraction into a single unit operation, allowing the continuous removal and concentration of a given species. In this paper the feasibility of applying liquid membrane pertraction to the recovery of chromium (Cr(VI)) from aqueous effluents with the objective of reducing levels to below allowable discharge limits has been examined. A continuous laboratory-scale liquid membrane pertractor was constructed to solve a variety of problems associated with the treatment of Cr(VI)-bearing streams. Various operational factors such as feed velocity, strip velocity, membrane velocity, and composition of the inlet feed were then examined. Satisfactory continuous runs lasting up to 22 days were achieved. Chromium levels in synthetic waste could be reduced from 200-300 mg/L down to 1 mg/L, well within most allowable discharge limits. Experiments showed that the strip phase can be concentrated with inlet Cr(VI) concentrations of 2000 ppm Cr(VI), with indications that it should be possible at even higher concentrations.