SLIDING WEAR TESTING OF COATED CUTTING-TOOL MATERIALS

被引:44
作者
HEDENQVIST, P
OLSSON, M
机构
[1] Division of Materials Science, Department of Technology, Uppsala University, S-751 21 Uppsala
关键词
SLIDING WEAR; COATED MATERIALS;
D O I
10.1016/0301-679X(91)90020-A
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The sliding wear characteristics of TiC-coated cemented carbide and TiN-coated high-speed steel during simulated machining conditions have been investigated using a modified pin-on-ring test. The influence of sliding distance and sliding speed on the amount of wear has been determined and the dominant wear mechanisms have been characterized using light optical microscopy and scanning electron microscopy. The sliding wear resistance of the investigated material combinations was found to be strongly dependent on the sliding speed. The dominant wear mechanisms were identified as adhesive wear (coating) and solution wear (substrate) for the TiC-coated cemented carbide while the TiN-coated high-speed steel was worn by a combination of cracking and plucking of TiN fragments and adhesive wear of the high-speed steel.
引用
收藏
页码:143 / 150
页数:8
相关论文
共 22 条
[1]  
Hedenqvist, Olsson, Wallen, Kassman, Hogmark, Jacobson, How TiN coatings improve the performance of high speed steel cutting tools, Surf. Coat. Technol., 41, pp. 243-256, (1990)
[2]  
Schintlmeister, Pacher, Raine, Wear characteristics of hard material coatings produced by chemical vapour deposition with particular reference to machining, Wear, 48, pp. 251-266, (1978)
[3]  
Dearnley, Rake and flank wear mechanisms of coated cemented carbides, Surf. Engng., 1, 1, pp. 43-58, (1985)
[4]  
Olsson, Soderberg, Jacobson, Hogmark, Simulation of cutting tool wear by a modified pin-on-disc test, Int. J. Machine Tools Man., 29, 3, pp. 377-390, (1989)
[5]  
Olsson, Soderberg, Jacobson, Hogmark, A new equipment for friction and wear testing of cutting tool materials, Tribologia, 5, 3-4, pp. 109-124, (1986)
[6]  
Trent, Metal Cutting, (1984)
[7]  
Olsson, Stridh, Jansson, Soderberg, Sliding wear of hard materials—the importance of a fresh countermaterial surface, Wear, 124, pp. 195-216, (1988)
[8]  
Olsson, Jansson, Stridh, Soderberg, Carlsson, Mechanical and tribology properties of chemically vapour-deposited boron carbide coatings, Materials Science and Engineering: A, 105-106 A, pp. 453-463, (1988)
[9]  
Stjernberg, Thelin, Wear mechanisms of coated carbide tools in machining of steel, Proc. Int. Conf. on High Productivity Machining, Materials and Processing, (1985)
[10]  
Nordgren, Melander, Tool wear and inclusion behaviour during turning of a Ca-treated quenched and tempered steel using coated cemented carbide tools, Proc. 1st Int. Conf. on the Behaviour of Materials in Machining, (1988)