FAILURE PROBABILITY OF NUCLEAR PIPING DUE TO IGSCC

被引：5

作者：

NILSSON, F

BRICKSTAD, B

SKANBERG, L

机构：

[1] Royal Institute of Technology

来源：

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 1990年 / 43卷 / 1-3期

关键词：

D O I：

10.1016/0308-0161(90)90102-N

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A simple model for the estimation of the pipe break probability due to IGSCC is developed and discussed. It is partly based on analytical procedures, partly on service experiences from the Swedish BWR program. Some rough estimates of the resulting break probabilities indicate that further studies are urgently needed. A sensitivity study is performed and it is found that the uncertainties about the initial crack configuration are the most important contributors to the total uncertainty. The results of inservice inspection are studied and it is found that the inspection intervals need to be shortened if a significant reduction in the failure probabilities is to be obtained. © 1990.

引用

页码：205 / 217

页数：13

共 11 条

[1]

WASH-1400, Reactor safety study: An assessment of accident risks in US commercial nuclear power plants, NUREG/CR-75/014, (1975)

[2]

Bush, Statistics of pressure vessel and piping failures, J. Pressure Vessel Technol. Trans. ASME, 110, pp. 225-233, (1988)

[3]

Harris, Dedhia, Eason, Patterson, Probability of failure in BWR reactor coolant piping, NUREG/CR-4792, 3, (1986)

[4]

Hazelton, Technical report on material selection and processing guidelines for BWR coolant pressure boundary piping, NUREG 0313, (1986)

[5]

Evaluation of Flaws in Austenitic Steel Piping, Journal of Pressure Vessel Technology, 108, pp. 352-366, (1986)

[6]

Nilsson, Brickstad, An estimation of the probability of failure for BWR-piping in Sweden, Trans. SMiRT 10, pp. 99-104, (1989)

[7]

Doctor, Bates, Heasler, Spanner, Nondestructive examination (NDE) reliability for inservice inspection of light water reactors, NUREG/CR-4469, 1-6, (1984)

[8]

Wheeler, Rankin, Spanner, Badalamente, Human factors study conducted in conjunction with a mini-round-robin assessment of ultrasonic technician performance, NUREG/CR-4600, (1986)

[9]

Taylor, Spanner, Heasler, Doctor, Deffebaugh, An evaluation of human reliability in ultrasonic in-service inspection for intergranular stress-corrosion cracks through round-robin testing, Materials Eval., 47, pp. 338-344, (1989)

[10]

Simonen, Woo, Analyses of the impact of inservice inspection using a piping reliability model, NUREG/CR-3869, (1984)

← 1 2 →